Klark Teknik DN9344E User Manual download pdf (Page 5)

HELIX DN9340E/DN9344E Remote Control Software

User Guide

5 of 65

1 INTRODUCING THE HELIX REMOTE CONTROL SOFTWARE

The HELIX Equaliser Remote Control Software (HELIX RCS) enables engineers to remotely program a

network of up to 64 HELIX equaliser channels from a laptop or PC for onward downloading to the

DN9340E or DN9344E units at a venue. This means that programming can be done in advance of a

show from home or en-route, leaving more time for fine-tuning.

At the venue, the settings can be quickly downloaded to the equaliser network. Thereafter, a HELIX

RCS laptop/PC can be used for real-time control of the slave equaliser network during both set-up and

performance. Using the HELIX RCS in place of a DN9340E offers an enhanced visual overview of slave

performance, as well as significant time-savings in switching between slave units, navigating

equalisation views and adjusting settings. Furthermore, for optimal control during set-up, the laptop/PC

can be set up to communicate with the slave network over a wireless connection, leaving the engineer

free to move around the venue while adjusting the equalisation settings. For performance, Ethernet

communication is used, although there is an option for conventional serial RS-232, if required. Settings

can also be uploaded from the DN9340E/DN9344E Equalisers to the HELIX RCS.

In addition to the active settings, HELIX RCS can also be used to remotely program all the equaliser

memories, and that includes the 32 lockable Preset (flash) memories, which can only be programmed

from an external computer.

The HELIX RCS runs as an AddIn to the Midas Klark Teknik ELGAR Library Manager, enabling you to

work on settings for your equaliser devices alongside other Midas or Klark Teknik devices, for example,

a console, and save them all in a single show file. The show file can then be reused from venue to

venue. In addition, you can minimise time and effort by copying settings between the HELIX RCS AddIn

devices.

Please note that, for the purposes of this manual, a HELIX DN9340E or DN9344E unit is the actual

physical version connected to the system and an RCS unit is a unit in HELIX DN9340E/DN9344E RCS.

Also, some of the screenshots in the manual may appear slightly different to those on your screen due

to configuration and status of the system, units and your laptop/PC.

Note

Earlier HELIX DN9340 and DN9344 devices (non-E) may be connected to the network and

controlled using the HELIX DN9340E/DN9344E RCS, provided that the connection to these

devices is in accordance with Appendix 9.2 of this User Guide.

1 2 3 4 5 6 7 8 9 10 ... 64 65

No comments

Klark Teknik DN9344E User Manual Page 5