Klark Teknik DN9344E User Manual download pdf (Page 65)

HELIX DN9340E/DN9344E Remote Control Software

User Guide

65 of 65

3 Connect the UDS1100 Converter as follows:

Direct: Use CAT5 cross over cable to connect the UDS1100 RJ-45 port to the laptop/PC RJ-

45 port.

LAN: Use CAT5 cable to connect the RJ-45 port on the UDS1100 to its network connection

point. Similarly, use CAT5 cable to connect the laptop/PC RJ-45 port to its network

point.

Wireless: Position the Access Point to maintain line of sight visibility to your laptop as you

move around the venue during the sound testing, while remaining in the Access

Point’s radio limits, for example, use a high up location, generally no more than

100m from the furthest sound testing postion. Connect power to the Access Point

as indicated in the product manual.

Use CAT5 cable to connect the UDS1100 RJ-45 port to the Access Point RJ-45 (LAN)

port.

4 Using the provided AC power adapter, connect power to the Lantronix UDS1100 Converter.

5 Boot up (or re-boot) your laptop/PC and open ELGAR by double clicking on the ELGAR

desktop icon.

6 Select File > Open from the ELGAR menu and open the .KTG show file with the HELIX

settings. ELGAR initiates the Ethernet connection and reports success or failure. If it fails,

see Fault Finding tips.

7 In the upper Home tab of each HELIX Add-In:

- specify the Address of the slave unit that the Add-In relates to

- set COM Port to the number you allocated to the Virtual COM Port

- set Comms Mode to Generic Echo On for RS-232 or Generic Echo Off for RS-485 input to the

first HELIX.

Your system should now be ready for online operation.

1 2 ... 60 61 62 63 64 65

No comments

Klark Teknik DN9344E User Manual Page 65