Klark Teknik DN9652 User Manual download pdf (Page 35)

Ethernet IP Addressing

DN9650/DN9652 Network Bridge

Operator Manual 21

Ethernet IP Addressing

The IP address (default 192.168.10.10) can be changed via the configuration menu to

allow operation as part of an Ethernet network. The default netmask value is

255.255.0.0, but you can also modify this if you want.

>> To change the IP address of the DN965X

1 In the IP Address section of the configuration window, click Change IP

Address.

2 In the New IP Address after reboot field of the Change IP Address window,

type in the desired IP address. The range is 0.0.0.0 to 254.254.254.254.

3 In the New Netmask after reboot field, type in the desired netmask. The

range is 0.0.0.0 to 255.255.255.255.

Note: If you change the netmask, you will have to reconfigure your computer’s

IP address/netmask.

4 Click OK. The Change IP Address window will close. The IP Address section

of the configuration window will now display a new field, which informs yo what

the new IP address will be after reboot. (This field will disappear after a reboot.)

5 For the new IP address and netmask to come into effect, reboot the DN965X by

switching it off and then on again. (The new IP address will be displayed during

startup.)

6 To reconnect to the configuration web page you will need to type in the new

IP address in the browser’s address (see “To connect the DN965X to a computer

and then open its configuration menu in the web browser” on page 4).

If you have changed the subnet, you will also have to reconfigure your

computer’s IP address/subnet mask.

Temporary IP address field

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

No comments

Klark Teknik DN9652 User Manual Page 35